Accueil     AM-520 HVAC Multimetètre
AM-520 HVAC Multimetètre
<< Précédent - Suivant >>

AM-520 HVAC Multimetètre


AC/DC, MHz, MOhm, µF

  • 600V AC/DC; 10A AC/DC; 10 MHz, 400 Ohm, 4000 µF


EUR 82.99
hors TVA

Code article: 110-520

AM-520 HVAC Multimetètre


  • Info produit
  • Produits relatés

Designed primarily for HVAC professionals, the AM-520 autoranging digital multimeter offers all the most commonly used HVAC digital multimeter features such as temperature, micro amps to troubleshoot flame sensors, and capacitance to check motor startup capacitors.

With its CAT III safety rating, this high voltage multimeter measures a broad range of electrical parameters.

  • Measurements : voltage up to 600Vac and 600Vdc, ac/dc current, resistance, frequency, capacitance, temperature
  • VolTect™ Non-contact voltage detection
  • Built-in test leads storage and “third hand holder”
  • Audible continuity
  • Diode test
  • Data hold
  • Max/min memory
  • Relative zero mode
  • Built-in flashlight
  • Auto and manual ranging
  • Auto power off and low battery warning
  • Backlit LCD display with analog bargraph
  • Velcro strap to hang a meter
  • Safety rated : CAT III 600V

Specifications
       Range
          Accuracy
DC Current
400.0 μA / 4000 μA / 40.00 mA / 400.0 mA /
4.000 A / 10.00 A
(1.2% rdg + 3 LSD) @ 400 μA to 400 mA ranges, 45 Hz to 400 Hz
AC Current
400.0 μA / 4000 μA / 40.00 mA / 400.0 mA /
4.000 A / 10.00 A
(1.2% rdg + 3 LSD) @ 400 μA V to 400 mA ranges
AC Voltage
400 mV / 4.000 V / 40.00 V / 400.0 V / 600 V
(1.0 % rdg + 3 LSD) @ 45 Hz to 400 Hz, 4 V to 400 V ranges
DC Voltage
400 mV / 4.000 V / 40.00 V / 400.0 V / 600 V
(0.8% rdg + 1 LSD) @ 4 V to 400 V ranges
Frequency
10 Hz to 10 MHz
(0.1% rdg + 4 LSD) @ 400 μA to 400 mA ranges
Resistance
400.0 Ω / 4.000 kΩ / 40.00 kΩ / 400.0 kΩ /
4.000 MΩ / 40.00 MΩ
(1.0% rdg + 2 LSD) @ 4 kΩ to 400 kΩ ranges
Capacitance
40.00 nF / 400.0 nF / 4.000 μF / 40.00 μF /
400.0 μF / 4000 μF
(3.0% rdg + 5 LSD) @ 400 nF to 40 μF ranges
Temperature
-40 °C to 1000 °C
(1.2% rdg + 3 °C) @ >0 °C to 100 °C
Info
Measures AC/DC voltage up to 600V, AC/DC current, resistance, frequency, capacitance and temperature.
CAT III 600V safety rated. Non-contact voltage detection enhances safety. Audible continuity quickly identifies shorts and opens. Diode test to verify polarity. Number of temperature inputs : Single Thermocouple.
Data hold freezes the reading on the display for further analysis. MIN/MAX recording records min/max measurements over time to show voltage fluctuations. Auto and manual-ranging delivers maximum flexibility.

The backlit LCD display makes it easy to read, and it's easy to use with non-contact voltage detection, the “third hand probe holder, and the built-in flashlight.

Combines user friendly features such as, auto power-off to conserve battery life, low battery warning, a “third hand test probe holder, built-in test leads storage, a built-in flashlight, and a Velcro strap to hang the meter.
Relative zero mode displays the difference between the actual reading and a stored reference value and may be used with any function or range

Included Accessories
- 9V(6F22) x1 battery installed
- Test leads
- Type-K Probe
- Velcro strap
- Carrying case
- Users manual